CS3351 Digital Principles and Computer Organization Syllabus:
CS3351 Digital Principles and Computer Organization Syllabus – Anna University Regulation 2021
COURSE OBJECTIVES:
To analyze and design combinational circuits.
To analyze and design sequential circuits
To understand the basic structure and operation of a digital computer.
To study the design of data path unit, control unit for processor and to familiarize with the hazards.
To understand the concept of various memories and I/O interfacing.
UNIT I COMBINATIONAL LOGIC
Combinational Circuits – Karnaugh Map – Analysis and Design Procedures – Binary Adder – Subtractor – Decimal Adder – Magnitude Comparator – Decoder – Encoder – Multiplexers – Demultiplexers
UNIT II SYNCHRONOUS SEQUENTIAL LOGIC
Introduction to Sequential Circuits – Flip-Flops – operation and excitation tables, Triggering of FF, Analysis and design of clocked sequential circuits – Design – Moore/Mealy models, state minimization, state assignment, circuit implementation – Registers – Counters.
UNIT III COMPUTER FUNDAMENTALS
Functional Units of a Digital Computer: Von Neumann Architecture – Operation and Operands of Computer Hardware Instruction – Instruction Set Architecture (ISA): Memory Location, Address and Operation – Instruction and Instruction Sequencing – Addressing Modes, Encoding of Machine Instruction – Interaction between Assembly and High Level Language.
UNIT IV PROCESSOR
Instruction Execution – Building a Data Path – Designing a Control Unit – Hardwired Control, Microprogrammed Control – Pipelining – Data Hazard – Control Hazards.
UNIT V MEMORY AND I/O
Memory Concepts and Hierarchy – Memory Management – Cache Memories: Mapping and Replacement Techniques – Virtual Memory – DMA – I/O – Accessing I/O: Parallel and Serial Interface – Interrupt I/O – Interconnection Standards: USB, SATA
PRACTICAL EXERCISES:
1. Verification of Boolean theorems using logic gates.
2. Design and implementation of combinational circuits using gates for arbitrary functions.
3. Implementation of 4-bit binary adder/subtractor circuits.
4. Implementation of code converters.
5. Implementation of BCD adder, encoder and decoder circuits
6. Implementation of functions using Multiplexers.
7. Implementation of the synchronous counters
8. Implementation of a Universal Shift register.
9. Simulator based study of Computer Architecture
COURSE OUTCOMES:
At the end of this course, the students will be able to:
CO1 : Design various combinational digital circuits using logic gates
CO2 : Design sequential circuits and analyze the design procedures
CO3 : State the fundamentals of computer systems and analyze the execution of an instruction
CO4 : Analyze different types of control design and identify hazards
CO5 : Identify the characteristics of various memory systems and I/O communication
TEXT BOOKS:
1. M. Morris Mano, Michael D. Ciletti, “Digital Design : With an Introduction to the Verilog HDL, VHDL, and System Verilog”, Sixth Edition, Pearson Education, 2018.
2. David A. Patterson, John L. Hennessy, “Computer Organization and Design, The Hardware/Software Interface”, Sixth Edition, Morgan Kaufmann/Elsevier, 2020.
REFERENCES:
1. Carl Hamacher, Zvonko Vranesic, Safwat Zaky, Naraig Manjikian, “Computer Organization and Embedded Systems”, Sixth Edition, Tata McGraw-Hill, 2012.
2. William Stallings, “Computer Organization and Architecture – Designing for Performance”, Tenth Edition, Pearson Education, 2016.
3. M. Morris Mano, “Digital Logic and Computer Design”, Pearson Education, 2016.