OME552 Vibration and Noise Control Syllabus:
OME552 Vibration and Noise Control Syllabus – Anna University Regulation 2017
OBJECTIVES:
The student will be able to understand
- Basic about the noise and its control methods.
- the sources of vibration and noise in automobiles and make design modifications to reduce the vibration and noise and improve the life of the components.
- about the noise in the automotive sources.
- various control techniques in controlling noise and vibrations.
- know about the source of noise.
UNIT I BASICS OF VIBRATION
Introduction, classification of vibration: free and forced vibration, undamped and damped vibration, linear and nonlinear vibration, response of damped and undamped systems under harmonic force, analysis of single degree and two degree of freedom systems, torsional vibration, determination of natural frequencies.
UNIT II BASICS OF NOISE
Introduction, amplitude, frequency, wavelength and sound pressure level, addition, subtraction and averaging decibel levels, noise dose level, legislation, measurement and analysis of noise, measurement environment, equipment, frequency analysis, tracking analysis, sound quality analysis.
UNIT III AUTOMOTIVE NOISE SOURCES
Noise Characteristics of engines, engine overall noise levels, assessment of combustion noise, assessment of mechanical noise, engine radiated noise, intake and exhaust noise, engine necessary contributed noise, transmission noise, aerodynamic noise, tire noise, brake noise.
UNIT IV CONTROL TECHNIQUES
Vibration isolation, tuned absorbers, un-tuned viscous dampers, damping treatments, application dynamic forces generated by IC engines, engine isolation, crank shaft damping, modal analysis of the mass elastic model shock absorbers.
UNIT V SOURCE OF NOISE AND CONTROL
Methods for control of engine noise, combustion noise, mechanical noise, predictive analysis, palliative treatments and enclosures, automotive noise control principles, sound in enclosures, sound energy absorption, sound transmission through barriers
TEXT BOOK:
1. Singiresu S.Rao, “Mechanical Vibrations”, 5th Edition, Pearson Education, 2010
REFERENCES:
1. Benson H. Tongue, “Principles of Vibrations”, 2nd Edition, Oxford University, 2007
2. David Bies and Colin Hansen, “Engineering Noise Control – Theory and Practice”,4th Edition, E and FN Spon, Taylore & Francise e-Library, 2009
3. William T. Thomson, Marie Dillon Dahleh, Chandramouli Padmanabhan, “Theory of Vibration with Application”, 5th Edition Pearson Education, 2011
4. Grover. G.T., “Mechanical Vibrations”, Nem Chand and Bros., 1996 10
5. Bernard Challen and Rodica Baranescu – “Diesel Engine Reference Book”, Second Edition, SAE International, 1999.
6. Julian Happian-Smith – “An Introduction to Modern Vehicle Design”- Butterworth Heinemann, 2004
7. Rao, J.S and Gupta, K., “Introductory course on Theory and Practice of Mechanical Vibration”, 2nd Edition, New Age International Publications, 2010
8. Shabana. A.A., “Theory of vibrations – An introduction”, 2nd Edition, Springer, 2010
9. Balakumar Balachandran and Edward B. Magrab, “Fundamentals of Vibrations”, 1st Editon, Cengage Learning, 2009
10. John Fenton, “Handbook of Automotive body Construction and Design Analysis – Professional Engineering Publishing, 1998